iron ore jaw crusher exporter in malaysia

Product introduction

Jaw crusher common jaw broken, also known as the tiger mouth.Consists of two piece of jaw, moving jaw and static jaw crushing cavity, the simulation of the animals two jaw crusher movement and complete material crushing operations.Widely used in mining metallurgy, building material, highway, railway, water conservancy and chemical industry, etc all kinds of ores and large materials in pieces.Being broken material maximum compressive strength of 320 mpa.

Jaw crusher in mining, building materials, construction and other departments are mainly used as coarse crusher and crusher.According to the inlet width size is divided into large, medium and small three, inlet width is greater than 600 mm for large machines, feed port in 300-600 – mm width for medium-sized machine, feeding mouth width is less than 300 mm for the minicomputer.Jaw crusher structure is simple, easy manufacturing, reliable work.

Online consulting

Product traits or characteristics

1, effectively solve the original limestone crusher for lower production led to high rates of operation, without maintenance time.
2, can complete chunk of the limestone crushing, maximum crushing particle size is 1000 * 1200 mm, effectively solve the original “is limestone supply tension, while the storage large chunks of limestone is not able to use problem”.
3, two kinds of material mixing uniformity is good, improve the dosage of the desulfurization limestone.Adding quantity can reach 60%, effectively reduce the source of raw materials.
4, power consumption declined.1 to 2 tons of limestone power consumption dropped KWH/t can save electricity, 100000 yuan a year.
5, scrap particle size is small, only for 2-15 mm effectively solve the original limestone particle size is large, often blocking or even influence the production of flour mill of the valve.

The working principle of

The eccentric shaft rotates under the action of drive device, making the jaw move up and down. The materials are broken into small pieces as a result of the motion of collision, squeezing and rubbing. After this, materials are discharged from the discharge port.

Basic parameters of products

Model Feeding
Opening
Size
(mm)
Max.
Feeding
Size
(mm)
Adjustment
Range of
Discharging Opening
(mm)
Capacity
(t/h)
Electric power
(kw)
Outline dimension
(mm)
Weight
(t)
PE-250×400 250×400 210 20-80 5-20 15 1450×1315×1296 3
PE-400×600 400×600 350 40-100 16-65 30 1700×1732×1653 7.2
PE-500×750 500×750 425 50-100 40-110 55 2035×1921×2000 11
PE-600×900 600×900 500 65-140 90-180 55-75 2290×2206×2370 16
PE-750×1060 750×1060 630 80-160 110-320 110 2655×2302×3110 29
PE-900×1200 900×1200 750 100-200 200-400 132 3380×2870×3330 54.5
PE-1000×1200 1000×1200 850 195-260 220-450 160 3480×3876×3330 58
PE-1200×1500 1200×1500 1020 150-330 400-800 180-220 4200×3750×3820 100.9
PEX-250×750 250×750 210 25-60 15-30 22-30 1667×1545×1020 5
PEX-250×1000 250×1000 210 25-60 16-50 30-37 1530×1992×1380 7
PEX-250×1200 250×1200 210 25-60 20-60 37 1900×2192×1430 8
PEX-300×1300 300×1300 250 25-105 20-90 75 2720×1950×1600
777777777777777777777777777777777777777777777777777777777777777777777777777777